Description

Lapua Brass 300 PRC Box of 100

The .300 PRC was designed for extreme long range shooting with heavy bullets featuring high ballistic coefficients. Its superior ballistics and beltless case configuration represent modern
case design that supports the use of modern long and high BC bullets. With its ability to load heavier bullets, the performance of the .300 PRC exceeds the .300 Winchester Magnum and
many other .30 Magnums on the market. The .300 PRC is also an superb choice in open and large hunting fields for long distance hunting of mid-to-large sized game with bullet
weights exceeding 15,8 g / 245 grains.

Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

Picture may slightly vary from actual product.